Hydro Power in the form of small run-of-river hydro power plants or large dams and reservoirs for hydroelectric generation all use the kinetic energy of moving water as their power source. Hydropower in all its forms is a renewable energy source with hydroelectric generation powering millions of homes a businesses around the world. Water is the fuel of hydropower, but the effects of climate change on waterfall and rain patterns can also affect the capacity of the electrical energy produced
Hydrokinetic energy uses turbines placed directly in river, ocean, or tidal currents to generate electrical power. The amount of hydrokinetic power available depends on the speed of the moving water in the form of a current within the river or ocean. Hydrokinetic energy devices are ideally installed at various locations around the world which have relatively steady water flows throughout the year and are not affected by flooding, water turbulence, or long periods of low water levels. Tidal currents under the gravitational influence of the moon and sun change direction and velocity depending on the local geography with river and tidal current hydrokinetic energy devices being installed above and below the waterline
Low pressure micro hydro power scheme is another type of hydropower technology which uses low-pressure, low-head turbines to generate electricity without the need for dams or water impoundment. Micro hydro power is another renewable energy source with a low environmental impact and having several advantages over the use of fossil fuels as it is a non-polluting, renewable resource causing minimal environmental disruption to both the river and the native ecology.
Hydroelectricity uses the force of falling water from large reservoirs or the flowing water of rivers, streams and waterfalls to generate electrical energy using water turbines. Hydroelectricity genetation schemes are common throughout the world and are a well established clean energy source with pumped hydro storage and run-of-river schemes used to generate electricity. Being a flexible, readily available and zero emissions source of renewable energy, hydro power will continue to play a vital role in our clean energy future
Penstocks are pipes, tunnels, canals or channels used to transport water from river to turbine. Penstock design is an important part of any hydropower scheme because without it, the turbine blades would not rotate. Hydro energy is a well known and used form of renewable energy resource that uses both the stored potential energy and the kinetic energy of water as a source of power. The correct design of a penstock for hydropower projects reduces its cost, improves water flow, and saves on waste water.
Pumped hydro storage uses the potential energy of stored water to generate electrical energy. Impoundment type hydroelectric power generating stations use dams and water reservoirs holding millions of gallons of water released through valves, sluice gates and pipes to drive rotate turbine blades. The mass flow of water from the dam or reservoir once released is allowed to flow away down the river until nature’s hydro-logic cycle in the form of rain or melting snow fill’s the dams reservoirs back up again. In pumped hydro storage systems, water is held between two ponds or reservoirs so that during periods of low electrical demand the water is pumped and stored in an upper reservoir or pond, but on demand is released to generate electrical energy and stored in a lower reservoir or pond
Hydroelectric power is a renewable source of energy using the gravitational flow of water. Water in motion from rivers, ponds, lakes and reservoirs can all be used to generate hydro power and natures weather ensures that the water cycle is a renewable resource. Hydroelectric power uses the kinetic energy of flowing water used to turn turbines and generators with the head height and pressure of the moving water determining the amount of electrical energy that is produced. Hydroelectric plants do not create air pollution or emissions as the fuel, the falling water, is not consumed but flows away downstream for use another day
Hydro power has tremendous potential in supplying the whole of the planets energy need just using flowing water. Hydro power uses the kinetic energy of moving water to create energy and is one of the most efficient and cost effective of all the renewable energy sources available for the production of electricity. Because of this, it is also the most commonly utilized alternative energy source in the world today, with dams and hydro power stations providing a large majority of all our energy needs now and in the future. From the simplest of waterwheels to the largest hydro power station, the power of running water is one of the easiest to install, control and the cheapest to run
Small scale hydro power schemes exploit water as a renewable resource and are characterised by their use of local, small hydropower plants installed on small rivers and pipelines so do not require the expensive construction of dams or reservoirs also making them environmentally friendly. Low-cost small scale hydro power plants generate electrical energy for one or more housholds from a single stream. Due to their simple construction and low head pressure, small scale hydro installations tend to use Turgo turbine designs.
Hydro energy generation uses the gravational movement of water using conventional hydro, run-of-river, or pump-storage systems to funnel the water through hydro turbines in order to generate electrical power. Hydro energy ranges from large scale hydropower facilities using dams, reservoirs and storage, to small scale run-of-river projects in streams and rivers making it one of the most mature renewable technologies for electricity generation around the world. Hydro energy is the sustainable and safe exploitation of water with the different types of turbines defining the system.
